China High Performance Injection ukubumba imishini umphakeli
FLS-PACK380 Ton High Speed ​​​​Injection Molding Machines
I-China Ningbo FLYSE Plastic Machinery ingumphakeli ochwepheshe we 380 Imishini yokubumba yomjovo wepulasitiki enesivinini esikhulu enamanani ancintisanayo. Lo mshini wokujova ngesivinini esiphezulu uklanyelwe ngokukhethekile izinto zepulasitiki ezacile zodonga oluphakathi nendawo ezakha njengemikhiqizo ye-IML, iziqukathi zokudla okusheshayo, nezinkezo. Isivinini somjovo singenziwa ngendlela efanele ngokwemikhiqizo yangempela.
- Amandla okubamba: 350 Ithoni / 3500kN
- Theory Shot isisindo: 378g (B isikulufu)
- Ibanga lebha yokubopha: 655× 620
- Amandla emoto:94.2Kw
- Imininingwane
| Imodeli | Iyunithi | FLS-PACK380 |
| Isilinganiso sosayizi wamazwe ngamazwe | ||
| Iyunithi yomjovo | ||
| Isikulufu ububanzi | mm | 50 |
| Isilinganiso se-Screw L/D | L/D | 25 |
| Ivolumu yokudutshulwa kwetiyori | cm³ | 420 |
| Shot isisindo | g | 378 |
| oz | 13.34 | |
| Isivinini sokujova | mm/s | 460 |
| Izinga lomjovo | cm3/s | 1675 |
| Ingcindezi yomjovo | Mpa | 165 |
| Umthamo wepulasitiki | g/s | |
| Isivinini sesikulufa | rpm | 400 |
| Iyunithi Yokubamba | ||
| Amandla okubamba | KN | 3800 |
| Ukuvula unhlangothi | mm | 700 |
| Isikhala phakathi kwama-tie-bar(H×V) | mm | 700*700 |
| Ukuphakama kwesikhunta esiphezulu | mm | 750 |
| Ubude besikhunta esincane | mm | 350 |
| I-Ejector stroke | mm | 180 |
| Amandla ejector | KN | 80.4 |
| Inombolo ye-Ejector | Ama-PC | |
| Abanye | ||
| Ubukhulu bokucindezela kwepompo | Mpa | 23 |
| Amandla okushayela | Kw | 94.2 |
| Amandla okushisa | Kw | 18.65 |
| Ubukhulu bomshini | m | 7.0*1.82*2.04 |
| Isisindo somshini | t | 15.5 |
| Umthamo wethangi lamafutha | L | 420 |
Imishini yokubumba umjovo wesivinini esiphezulu
Ifomu Lokubuza ( sizokubuyisela ngokushesha )
Mhlawumbe nawe uthanda
Ikhophi©2013 | I-China Ningbo Yongjiang Plastic Machinery Co., Ltd. | Imephu yesayithi
Isevisi
Yongjiang umphakeli wakho onokwethenjelwa!
Iskene, Khuluma ukuze uthole okungcono
