China High Performance Injection ukubumba imishini umphakeli
I-FLS-230-PET Ukusebenza Okuphezulu Okuphezulu 230 ton PET Injection Molding Machines
I-China Ningbo FLYSE Plastic Machinery ingumphakeli ochwepheshe we 230 Imishini yokubumba umjovo wepulasitiki we-Ton PET ngentengo enhle. Lo mshini womjovo we-PET osebenza kahle kakhulu uklanyelwe ngokukhethekile ukwenziwa kwezilwane ezifuywayo ezinosayizi abamaphakathi. Isistimu ye-Servo isetshenziswa.
- Amandla okubamba: 230 Ithoni / 2300kN
- Theory Shot isisindo: 830g (Isikulufu esikhethekile se-PET)
- Ibanga lebha yokubopha: 520× 520
- Amandla emoto:31.4Kw
- Imininingwane
| Imodeli | Iyunithi | I-FLS-230 PET |
| Isilinganiso sosayizi wamazwe ngamazwe | ||
| Iyunithi yomjovo | ||
| Isikulufu ububanzi | mm | 62 |
| Isilinganiso se-Screw L/D | L/D | 24∶1 |
| Ivolumu yokudutshulwa kwetiyori | cm³ | 814 |
| Shot isisindo | g | 830 |
| Ingcindezi yomjovo | Mpa | 131 |
| Isivinini sesikulufa | rpm | |
| Iyunithi Yokubamba | ||
| Amandla okubamba | KN | 2300 |
| Ukuvula unhlangothi | mm | 500 |
| Isikhala phakathi kwama-tie-bar(H×V) | mm | 520*520 |
| Ukuphakama kwesikhunta esiphezulu | mm | 550 |
| Ubude besikhunta esincane | mm | 220 |
| I-Ejector stroke | mm | 170 |
| Izinombolo ze-Ejector | mm | |
| Amandla ejector | mm | 102 |
| Abanye | ||
| Amandla okushayela | Kw | 31.4 |
| Amandla okushisa | Kw | 22.4 |
| Ubukhulu bomshini | m | 6.36*1.5*2.16 |
| Isisindo somshini | t | 7.5 |
Imishini yokubumba umjovo we-PET
Ifomu Lokubuza ( sizokubuyisela ngokushesha )
Mhlawumbe nawe uthanda
Ikhophi©2013 | I-China Ningbo Yongjiang Plastic Machinery Co., Ltd. | Imephu yesayithi
Isevisi
Yongjiang umphakeli wakho onokwethenjelwa!
Iskene, Khuluma ukuze uthole okungcono
