Kina dobavljač strojeva za injekcijsko prešanje visokih performansi

Blog

» Blog

Metoda inspekcije rashladnog uređaja hlađenog zrakom

kolovoz 18, 2021

Općenito, after using the air-cooled chiller for a long period of time, neki se problemi ne mogu izbjeći. Ako dođe do kvara, we should carefully check the operating conditions of the various parts of the ubrizgavanje mašina. Glavne točke su provjera rashladnog sustava, električni sustav, zračni sustav, i vodovodni sustav. Da procijeni jesu li njihove zadaće normalne, the editor below will analyze the inspection methods in detail with you.

Zrakom hlađeni hladnjak

No. 1, refrigeration system

Check whether there are cracks, breakages, frosting and condensation in the various pipes of the refrigeration system; whether there is any friction between the refrigeration pipes of the air-cooled chiller, and the pipes and the shell, especially the welding of the refrigerant pipes If there is any leakage at the joint connection, if there will be oil stains at the leakage position, you can also use a clean soft cloth or soft paper to scrub the pipe welding joint and the joint connection.

 

Drugi, električni sustav

Check whether the fuse of the rashladni uređaj električni sustav is blown, whether the insulation of the electrical wire is intact, whether the circuit board is cracked, whether the connection is loose, itd. Posebno, whether the electrical connection is well-touched, and the wiring screws and connectors are easily loosened to cause poor touch.

Treći, ventilation system

Check whether the air filter, heat exchanger coils and fins are too dusty; whether the air inlet and outlet are dredged; whether the fan and fan blades work normally; whether the wind power is normal, whether the water system is normal, itd. .

  1. Mechanical water system

Check whether the water system is leaking; whether the water inlet and outlet are dredged; whether the rashladni uređaj vodena pumpa works normally. Listen to the power on and listen to whether the compressor working sound of the air-cooled chiller is normal, whether there is abnormal sound, whether there is noise in the operation of electric fans, vodena pumpa, and whether the noise is too loud, itd. Kada je air-cooled chiller radi, the vibration is slight and the noise is small under normal conditions.

 

Ako imate bilo kakvih pitanja o brizganje,plz slobodno nas pitajte,pružit ćemo vam najbolju uslugu!

Whatsapp / Wechat 008618958305290

KATEGORIJA I OZNAKE:
Blog , ,

Možda se i vama sviđa

  • Posebni proizvodi

    Visokobrzinski strojevi za brizganje
    PET strojevi za brizganje
    Strojevi za brizganje PVC-a
    Dvobojni strojevi za brizganje

  • Kontaktirajte nas

    Mobilni:+86.18368497929
    Wechat: +86.18368497929
    što ima: +86.18368497929
    mreža:www.yongjiangimm.com
    E-mail:yongjiangimm@gmail.com

  • Servis
    Yongjiang vaš pouzdan dobavljač! Skenirajte ga, Razgovarajte na bolje