Fornitur ta 'magni tal-iffurmar tal-injezzjoni ta' Prestazzjoni Għolja taċ-Ċina

Blog

» Blog

Metodu ta 'spezzjoni ta' chiller imkessaħ bl-arja

Awissu 18, 2021

Ġeneralment, after using the air-cooled chiller for a long period of time, Xi problemi ma jistgħux jiġu evitati. Jekk hemm falliment, we should carefully check the operating conditions of the various parts of the injezzjoni magna. Il-punti ewlenin huma li tiċċekkja s-sistema ta 'refriġerazzjoni, sistema elettrika, Sistema tal-Ajru, u sistema tal-ilma. Biex tiġġudika jekk id-dar tagħhom hijiex normali, the editor below will analyze the inspection methods in detail with you.

Chiller imkessaħ bl-arja

No. 1, refrigeration system

Check whether there are cracks, breakages, frosting and condensation in the various pipes of the refrigeration system; whether there is any friction between the refrigeration pipes of the air-cooled chiller, and the pipes and the shell, especially the welding of the refrigerant pipes If there is any leakage at the joint connection, if there will be oil stains at the leakage position, you can also use a clean soft cloth or soft paper to scrub the pipe welding joint and the joint connection.

 

It-tieni, sistema elettrika

Check whether the fuse of the Chiller sistema elettrika is blown, whether the insulation of the electrical wire is intact, whether the circuit board is cracked, whether the connection is loose, eċċ. Partikolarment, whether the electrical connection is well-touched, and the wiring screws and connectors are easily loosened to cause poor touch.

It-tielet, ventilation system

Check whether the air filter, heat exchanger coils and fins are too dusty; whether the air inlet and outlet are dredged; whether the fan and fan blades work normally; whether the wind power is normal, whether the water system is normal, eċċ. .

  1. Mechanical water system

Check whether the water system is leaking; whether the water inlet and outlet are dredged; whether the Chiller pompa tal-ilma works normally. Listen to the power on and listen to whether the compressor working sound of the air-cooled chiller is normal, whether there is abnormal sound, whether there is noise in the operation of electric fans, pompa tal-ilma, and whether the noise is too loud, eċċ. Meta l- air-cooled chiller qed jaħdem, the vibration is slight and the noise is small under normal conditions.

 

Jekk għandek xi mistoqsijiet dwar iffurmar bl-injezzjoni,PLZ tħossok liberu li titlobna,aħna nagħtuk l-aħjar servizz!

Whatsapp / Wechat 008618958305290

KATEGORIJA U TAGS:
Blog , ,

Forsi tixtieq ukoll

  • Prodotti Speċjali

    Magni tal-iffurmar tal-injezzjoni b'veloċità għolja
    Magni tal-iffurmar tal-injezzjoni tal-PET
    Magni tal-iffurmar tal-injezzjoni tal-PVC
    Magni tal-iffurmar tal-injezzjoni tal-kulur doppju

  • Ikkuntatjana

    Mobbli:+86.18368497929
    Wechat: +86.18368497929
    Whatsapp: +86.18368497929
    Web:www.yongjiangimm.com
    E-mail:yongjiangimm@gmail.com

  • Servizz
    Yongjiang fornitur affidabbli tiegħek! Skennjaha, Tkellem għall-aħjar