kaayaan injection molding

nyetak suntik kaayaan is the important thing for workshop owner to master.

Molding suntik is an industry with a wide range of knowledge, téhnologi jeung prakték. Bahan baku plastik, toner, bahan nozzle, kapang, mesin suntik molding, parabot periferal, fixtures, nyemprot, rupa-rupa bahan bantu jeung bahan bungkusan dipaké dina prosés produksi suntik molding, which brings a lot of work to the management of the injection molding workshop Volume and a certain degree of difficulty. Janten, what are the conditions for injection molding? Let’s briefly understand below.

1. For different materials, the temperature required during injection molding is also different. Salaku conto, when the temperature is too low, there will be some abnormalities in the color of the liquid material; when the temperature is too high, the product will have the appearance of burrs after it is produced, and the quality of the product will not reach need.
   2. It is necessary to pay attention to controlling the speed in the pouring channel during injection molding. If it is too fast, there will be burrs, and it will also cause overfilling and burning. If it is too slow, there will be signs of shrinkage, and simple cracking. Ku sabab kitu, you must pay attention to the control of its processing speed when pouring, so that the quality of the products produced can meet the requirements.3.When processing, you need to pay attention to control the cooling time. The detailed required time also needs to be determined according to the details of the processed product. The processing of the kapang suntik will have a greater impact on the brightness of the finished product, so you must pay more attention.

Upami anjeun gaduh patarosan ngeunaan nyetak suntik,mangga ngarasa Luncat nanya kami,kami bakal masihan anjeun layanan pangalusna!

Whatsapp / Wechat 008618958305290