Mesin suntikan mésér janjian perhatian (2)

The correct selection of the type and specifications of the mesin suntik before use has a greater impact on the production cost, kualitas jeung efisiensi produksi suntik dijieun produk.

Sateuacan milih spésifikasi sareng modél mesin molding suntik, first check the performance parameter values ​​of the injection molding machine in the product instruction manual provided by the injection molding machine manufacturer.

These parameter values ​​represent the main performance characteristics of the injection molding machine. According to some technical requirements of the plastic products to be produced [such as the type and brand of raw materials used in the product, the quality (beurat) and the external dimensions of the product, jsb.] to find the similarity in the manual

The parameter value of the parameter value, the injection molding machine model corresponding to these parameter values ​​is the injection molding machine to be purchased.

Dina waktos anu sasarengan, we must also know whether the working accuracy, speed and product accuracy level of the injection molding machine to be purchased meet the molding conditions of the product.
Tools/Materials
Mesin Cacak
Method/Step
1. The key comparison data in the specifications and models include: the proportional relationship between the quality (or volume) and external dimensions of the injection molded product and the parameter value in the equipment, éta, the relationship between the quality (beurat) and the theoretical injection volume (or volume) tina mesin injection molding.

The proportional relationship: the size requirement between the sum of the product length (jangkungna) and the thickness of the forming mold (the thickness of the mold on the movable template) and the stroke distance of the movable template of the injection molding machine. Salaku tambahan, it should be verified that the structural dimensions of the mold to be installed on the injection molding machine are consistent with the conditions of the injection molding machine:

(1) The distance between the tie rods should be greater than the width and height of the mold to facilitate the assembly of the mold.
(2) The size of the template meets the size requirements of the molding die when it is installed and fixed.
(3) Lebar jeung jangkungna kapang kudu minuhan ukuran kapang minimum dianjurkeun ku mesin suntik molding.
2 Classification of injection molding machines
(1) Classified by plasticization method
1. Plunger type plastic injection molding machine
It has poor mixing properties and poor plasticization properties, so a shunt shuttle device must be installed. It is rarely used now.
2. Reciprocating screw type plastic injection molding machine;
Relying on the screw for plasticization and injection, the mixing and plasticizing properties are very good, and it is used most now.
3. Screw-the plunger type plastic injection molding machine relies on the screw for plasticization and the plunger for injection, the two processes are separated.
FLYSE is your comprehensive supplier of injection molding machine molding solutions. Buy an injection molding machine and look for Kejun.

If there is a problem with the injection molding machine, contact FLSYE. If there is a problem with molding, contact Kejun. A strong technical team and first-class service quality make you worry-free when you purchase the mesin!

3
(2) Classified according to the way of clamping
1. Mechanical
2. Hydraulic type
3.. Hydraulic-mechanical
Tindakan pancegahan
Injection molding machine parameters

Injection molding machine model

Upami anjeun gaduh patarosan ngeunaan nyetak suntik ,Plz ngarasa Luncat nanya tim FLYSE,kami bakal masihan anjeun layanan pangalusna!