China High Performance Injection ukubumba imishini umphakeli
Imishini Yokubumba I-FLS-PACK250 Ton High speed High
I-China Ningbo FLYSE Plastic Machinery ingumphakeli ochwepheshe we 250 Imishini yokubumba umjovo wepulasitiki wamathani enamanani ancintisanayo. Lo mshini wokujova ngesivinini esiphezulu uklanyelwe ngokukhethekile izinto zepulasitiki ezacile zodonga oluphakathi nosayizi omncane njenge-IML, isitsha sokulahla, i-cultery,njll. Ijubane lomjovo lingenziwa ngokwezifiso njengemikhiqizo ngayinye.
- Amandla okubamba: 250 Ithoni / 2500kN
- Theory Shot isisindo: 358g (B isikulufu)
- Ibanga lebha yokubopha: 570× 520
- Amandla emoto:61.8Kw
- Imininingwane
| Imodeli | Iyunithi | I-FLS-PACK250 |
| Isilinganiso sosayizi wamazwe ngamazwe | ||
| Iyunithi yomjovo | ||
| Isikulufu ububanzi | mm | 45 |
| Isilinganiso se-Screw L/D | L/D | 25 |
| Ivolumu yokudutshulwa kwetiyori | cm³ | 358 |
| Shot isisindo | g | 322 |
| oz | 11.35 | |
| Isivinini sokujova | mm/s | 380 |
| Izinga lomjovo | cm3/s | 496.5 |
| Ingcindezi yomjovo | Mpa | 157 |
| Umthamo wepulasitiki | g/s | |
| Isivinini sesikulufa | rpm | 400 |
| Iyunithi Yokubamba | ||
| Amandla okubamba | KN | 2500 |
| Ukuvula unhlangothi | mm | 490 |
| Isikhala phakathi kwama-tie-bar(H×V) | mm | 570*520 |
| Ukuphakama kwesikhunta esiphezulu | mm | 670 |
| Ubude besikhunta esincane | mm | 300 |
| I-Ejector stroke | mm | 150 |
| Amandla ejector | KN | 61.5 |
| Inombolo ye-Ejector | Ama-PC | 5 |
| Abanye | ||
| Ubukhulu bokucindezela kwepompo | Mpa | 23 |
| Amandla okushayela | Kw | 61.8 |
| Amandla okushisa | Kw | 15.05 |
| Ubukhulu bomshini | m | 5.74*1.45*1.78 |
| Isisindo somshini | t | 8.7 |
| Umthamo wethangi lamafutha | L | 300 |
Imishini yokubumba umjovo wesivinini esiphezulu
Ifomu Lokubuza ( sizokubuyisela ngokushesha )
Mhlawumbe nawe uthanda
Ikhophi©2013 | I-China Ningbo Yongjiang Plastic Machinery Co., Ltd. | Imephu yesayithi
Isevisi
Yongjiang umphakeli wakho onokwethenjelwa!
Iskene, Khuluma ukuze uthole okungcono
