pangropéa kapang

1: Die kudu grinded sanggeus pamakéan lila, sanggeus grinding beungeut ujung kudu demagnetized, teu tiasa gaduh magnét, disebutkeun gampang lumangsung bahan blocking. Dina raraga pikeun manggihan nu bagian jeung komponén geus ruksak jeung darajat maké, perusahaan kedah ngadamel rékaman lengkep sareng statistik panggunaanana, miara (lubrication, beberesih, pencegahan karat) jeung karuksakan, sangkan méré informasi pikeun manggihan jeung ngaréngsékeun masalah, jeung prosés molding parameter tina kapang jeung bahan dipaké pikeun produk, ku kituna pikeun shorten waktu sidang ngajalankeun kapang jeung ngaronjatkeun efisiensi produksi. Kedah di mesin injection molding, kaayaan operasi normal kapang, test kapang unggal jenis kinerja, sarta tungtungna ngabentuk ukuran bagian plastik pikeun ngukur kaluar, ngaliwatan informasi ieu bisa nangtukeun kapang kaayaan kiwari, manggihan karuksakan rongga, inti, Sistim cooling sarta permukaan parting, nurutkeun informasi disadiakeun ku bagian plastik, urang tiasa nangtoskeun status karuksakan kapang jeung ukuran pangropéa.
2: Spring jeung bagian elastis séjén dina pamakéan prosés cinyusu paling rentan ka ruksakna, biasana narekahan jeung deformasi. The method is to replace, in the replacement process must pay attention to the spring specifications and models, spring specifications and models through the color, diameter and length of three to confirm, only in the case of the same three can be replaced. The quality of the imported spring is preferred.
3: Die Use in the process of punch prone to break, bending and gnawing phenomenon, punch set is generally gnawing. The damage of punch and punch sleeve is usually replaced by parts of the same specification. The parameters of punch mainly include working part size, mounting part size, length size and so on.
4: Fastening Parts, check whether the fastening parts loose, damaged phenomenon, to take the approach is to find the same specifications of parts for replacement.
5: Pressing parts such as pressing plate, super glue, unloading parts such as stripping plate, pneumatic EJECTOR, jsb. . Maintenance of the parts of the relationship and check whether there is damage, repair of the damaged parts, pneumatic top material to check whether there is leakage, and take measures for the specific situation. If the trachea is damaged, replace it. Several important parts of the mold to focus on tracking detection: Ejection, guide parts to ensure that the role of the mold opening and closing movement and plastic parts ejection, if any part because of damage and stuck, will lead to stop production, kituna, we should always keep the lubrication of the ejector pin and guide pillar of the mould (the most suitable lubricant should be chosen) , and check regularly whether the ejector pin and guide pillar are deformed or damaged on the surface. Once found, they should be replaced in time, in order to protect the elastic strength of the bearing parts of the die with gear and rack and the spring die, special attention should be paid to the protection of the anti-rust oil on the working surface of the die, the moving parts and the guide parts, so as to ensure that they are always in the best working condition With the continuous production time, the cooling passage is easy to deposit scale, rust, silt and algae, which makes the section of cooling passage smaller, the cooling passage narrower, greatly reduces the heat exchange rate between the cooling liquid and the mold, and increases the production cost of the enterprise, kituna, attention should be paid to the cleaning of the runner and the maintenance of the heating and control system is very important to prevent the production failure.